Presentation of the product:
Name: Ardigital Printable Vinyl- White Removable Adhesive (PV)
Ardigital Printable Vinyl- White Removable Adhesive (PV) is designed with easy removal in mind, making it convenient for use in various applications.
Roll Quantity: 54 yds
Online sale:
- Width: 41 inch, 48 inch, 55 inch and 60 inch.
- Lenght: 5 yds,10 yds, 20 yds and 54 yds (full roll).
Warranty: 3 years
Description: Ardigital PV Easy-to-remove white vinyl with a matte and glossy finish, with very good cohesion due to its PV adhesive. Its acrylic base is a structure composed of a semi-rigid PVC film with an excellent matte or glossy finish.
Ideal for advertising applications in elevators such as door and side areas, escalators, vehicle signage, household appliances, shop window displays, short-term displays and other graphic pieces. Good performance on original vehicle paint, ideal for installations on billboards for outdoor promotional use, polystyrene, glass, acrylic, polycarbonate, among others. Its main feature is easy removal from different surfaces and is a permanent adhesive.
Characteristics
- Matte or Gloss white vinyl print side
- Permanent Adhesive V- PV
- Kraft paper backing - K135
- Service temperature range: 0°C to 90°C.
- Application temperature range: 0°C to 40°C.
- Die cutability: Excellent.
- Transparency: Good.
- Useful life (Months): outdoors vertical installation 36.
Adhesive Behavior
- Adhesion at Room Temperature: (23 ± 2) º C
- Galvanized sheet - Metal: Excellent
- Polystyrene sheet: Excellent
- Acrylic sheet: Excellent
- Stainless steel: Excellent
- Glass: Excellent
- Cardboard: N/Applicable
- MDF: N/Applicable
Endurance
Excellent Aging
Ultraviolet Excellent
Regular water absorption
Limitations of use
The product is not designed or recommended for the following uses and applications:
• Walls or walls due to its easy-to-remove adhesive.
• Curved or corrugated surfaces requiring superior conformity and low shrinkage.
• Surfaces that do not have adequate cleaning, preparation and/or finishing.
• Surfaces with low surface energy or with the presence of release agents (PTFE, silicones, waxes, etc.)
• Paints that do not have adequate drying, anchoring and curing or irregular paints that have pores or bumps.
• Rusty surfaces.
• Non-rigid and flexible substrates that tend to lose their stability or original shape.
• Pasted over existing graphics that require remaining intact during vinyl removal.
• Contact with chemical compounds, fuels and/or exposure to environments with the presence of organic vapors, acid gases, etc. •
Cardboard
•MDF
Printing process
It must be taken into consideration that the interaction of inks with self-adhesive vinyl during the printing process affects its components, and this is why it is important to allow the respective curing process of the inks to act depending on the inks being used. wearing . The recommendations are to wait at least a period of 24 hours after printing to carry out an additional lamination or installation process. Likewise, the conditions at the time of printing should be around 25°C with a relative humidity between 40 and 60%.
Pre-Installation Tests
It is advisable before carrying out an installation, to carry out a test with a letter-size print, adhering it to the surface to be installed and checking the adhesion and removal behavior after 24 hours.
Tips
When installing, the following recommendations:
• Ideally, they should be smooth surfaces.
• Wear gloves to avoid fingerprints on the vinyl film.
• As with most installation recommendations, it is important to clean the surface well of any degreasers or dust that may be present.
• The most recommended thing in these cases is NOT to use aqueous solutions for installation and always do it dry.
• It is recommended to clean with a cloth or alcohol wipe to remove grease and dirt.
• Tools such as spatula and heat gun should be used to help the installation process correctly.
• The help of a base primer to promote adhesiveness and reinforce the installation with edge sealant is recommended depending on the surface to help anchor the adhesive.
• The installation conditions must be ideal and the surface to be installed must be between 4° and 40°C and relative humidity between 40 and 60%.
• Hydrocarbon-free compounds must be used to clean the graph.
Vinyl Removal
Aspects to take into account for efficient vinyl removal:
• Carry out the removal slowly and maintain an angle of approximately 90° between the surface and the vinyl.
• Adhesive residue may remain on the surface, depending on the type of surface and compatibility with the adhesive, as well as the method used for removal.
Before starting production, it is recommended to carry out tests on the substrates beforehand due to the different compositions they may have.
Ideal for advertising applications in elevators such as door and side areas, escalators, vehicle signage, household appliances, shop window displays, short-term displays and other graphic pieces. Good performance on original vehicle paint, ideal for installations on billboards for outdoor promotional use, polystyrene, glass, acrylic, polycarbonate, among others. Its main feature is easy removal from different surfaces and is a permanent adhesive.
Characteristics
- Matte or Gloss white vinyl print side
- Permanent Adhesive V- PV
- Kraft paper backing - K135
- Service temperature range: 0°C to 90°C.
- Application temperature range: 0°C to 40°C.
- Die cutability: Excellent.
- Transparency: Good.
- Useful life (Months): outdoors vertical installation 36.
Adhesive Behavior
- Adhesion at Room Temperature: (23 ± 2) º C
- Galvanized sheet - Metal: Excellent
- Polystyrene sheet: Excellent
- Acrylic sheet: Excellent
- Stainless steel: Excellent
- Glass: Excellent
- Cardboard: N/Applicable
- MDF: N/Applicable
Endurance
Excellent Aging
Ultraviolet Excellent
Regular water absorption
Limitations of use
The product is not designed or recommended for the following uses and applications:
• Walls or walls due to its easy-to-remove adhesive.
• Curved or corrugated surfaces requiring superior conformity and low shrinkage.
• Surfaces that do not have adequate cleaning, preparation and/or finishing.
• Surfaces with low surface energy or with the presence of release agents (PTFE, silicones, waxes, etc.)
• Paints that do not have adequate drying, anchoring and curing or irregular paints that have pores or bumps.
• Rusty surfaces.
• Non-rigid and flexible substrates that tend to lose their stability or original shape.
• Pasted over existing graphics that require remaining intact during vinyl removal.
• Contact with chemical compounds, fuels and/or exposure to environments with the presence of organic vapors, acid gases, etc. •
Cardboard
•MDF
Printing process
It must be taken into consideration that the interaction of inks with self-adhesive vinyl during the printing process affects its components, and this is why it is important to allow the respective curing process of the inks to act depending on the inks being used. wearing . The recommendations are to wait at least a period of 24 hours after printing to carry out an additional lamination or installation process. Likewise, the conditions at the time of printing should be around 25°C with a relative humidity between 40 and 60%.
Pre-Installation Tests
It is advisable before carrying out an installation, to carry out a test with a letter-size print, adhering it to the surface to be installed and checking the adhesion and removal behavior after 24 hours.
Tips
When installing, the following recommendations:
• Ideally, they should be smooth surfaces.
• Wear gloves to avoid fingerprints on the vinyl film.
• As with most installation recommendations, it is important to clean the surface well of any degreasers or dust that may be present.
• The most recommended thing in these cases is NOT to use aqueous solutions for installation and always do it dry.
• It is recommended to clean with a cloth or alcohol wipe to remove grease and dirt.
• Tools such as spatula and heat gun should be used to help the installation process correctly.
• The help of a base primer to promote adhesiveness and reinforce the installation with edge sealant is recommended depending on the surface to help anchor the adhesive.
• The installation conditions must be ideal and the surface to be installed must be between 4° and 40°C and relative humidity between 40 and 60%.
• Hydrocarbon-free compounds must be used to clean the graph.
Vinyl Removal
Aspects to take into account for efficient vinyl removal:
• Carry out the removal slowly and maintain an angle of approximately 90° between the surface and the vinyl.
• Adhesive residue may remain on the surface, depending on the type of surface and compatibility with the adhesive, as well as the method used for removal.
Before starting production, it is recommended to carry out tests on the substrates beforehand due to the different compositions they may have.
