1 4

Presentation of the product:

Name: Ardigital Printable Vinyl- Grey Removable Adhesive (PVG)

When it comes to high-quality printable vinyl, look no further than Ardigital's PVG. With its superior printing capabilities and durable material, this product is perfect for all your printing needs. Trust in Ardigital to provide the best printable vinyl on the market.

Roll Quantity: 54 yds

Online sale: 

  • Width: 41 inch, 48 inch, 55 inch and 60 inch.
  • Lenght: 54 yds (full roll).

Warranty: 3 years

    Description: Ardigital PVG White vinyl with a good matte and glossy finish, very cohesive due to its PVG adhesive, its acrylic base is a structure composed of a highly flexible PVC film in an excellent matte or glossy finish.

    Ideal for advertising applications in elevators such as door and side areas, escalators, vehicle signage, household appliances, shop window displays, short-term displays and other graphic pieces.
    Vinyl features superior formability and high flexibility. The adhesive allows the vinyl to be slid and repositioned on the substrate until firm, uniform pressure is applied. The adhesive provides permanent adhesion on different substrates and allows efficient removal. The pigmentation of the adhesive gives the structure superior opacity.

    Characteristics
    - MATTE-GLOSS WHITE VINYL PRINT SIDE.
    - PERMANENT ADHESIVE V GRAY- PVG.
    - BACKING KRAFT PAPER - K135.
    - Service temperature range: 0°C to 90°C.
    - Application temperature range: 0°C to 40°C.
    - Die-cutability: N/Applicable.
    - Transparency: Regular.
    - Useful life (Months): outdoors vertical installation 36.

    Adhesive Behavior
    - Adhesion at Room Temperature (23 ± 2) º C.
    - Galvanized sheet - Metal: Good.
    - Polystyrene sheet: Good.
    - Acrylic sheet: Good.
    - Stainless steel: Excellent.
    - Glass: Good.
    - Cardboard: N/A.
    -MDF: N/A.

    Endurance
    - Aging: Excellent.
    - Ultraviolet: Excellent.
    - Water absorption: Regular.

    Limitations of use
    The product is not designed or recommended for the following uses and applications:
    • Walls or walls due to its easy-to-remove adhesive.
    • Curved or corrugated surfaces requiring superior conformity and low shrinkage.
    • Surfaces that do not have adequate cleaning, preparation and/or finishing.
    • Surfaces with low surface energy or with the presence of release agents (PTFE, silicones, waxes, etc.).
    • Paints that do not have adequate drying, anchoring and curing or irregular paints that have pores or ridges.
    • Rusty surfaces.
    • Non-rigid and flexible substrates that tend to lose their stability or original shape.
    • Pasted over existing graphics that require remaining intact during vinyl removal.
    • Contact with chemical compounds, fuels and/or exposure to environments with the presence of organic vapors, acid gases, etc.
    •Cardboard
    •MDF

    Printing Process
    It must be taken into consideration that the interaction of inks with self-adhesive vinyl during the printing process, so this affects its components, and this is why it is important to allow the respective curing process of the inks to act depending on the inks that are being used. The recommendations are to wait at least a period of 24 hours after printing to carry out an additional lamination or installation process. Likewise, the conditions at the time of printing should be around 25°C with a relative humidity between 40 and 60%.

    Pre-Installation Tests
    It is advisable before carrying out an installation, to carry out a test with a letter-size print, adhering it to the surface to be installed and checking the adhesion and removal behavior after 24 hours.

    Tips
    When installing, the following recommendations:
    • Ideally, they should be smooth surfaces.
    • Wear gloves to avoid fingerprints on the vinyl film.
    • As with most installation recommendations, it is important to clean the surface well of any degreasers or dust that may be present.
    • The most recommended thing in these cases is NOT to use aqueous solutions for installation and always do it dry.
    • It is recommended to clean with a cloth or alcohol wipe to remove grease and dirt.
    • Tools such as spatula and heat gun should be used to help the installation process correctly.
    • The help of a base primer to promote adhesiveness and reinforce the installation with edge sealant is recommended depending on the surface to help anchor the adhesive.
    • The installation conditions must be ideal and the surface to be installed must be between 4° and 40°C and relative humidity between 40 and 60%.
    • Hydrocarbon-free compounds must be used to clean the graph.

    Vinyl Removal
    Aspects to take into account for efficient vinyl removal:
    • Remove slowly and maintain an angle of approximately 90° between the surface and the vinyl.
    • Adhesive residue may remain on the surface, depending on the type of surface and compatibility with the adhesive, as well as the method used for removal.
    Before starting production, it is recommended to carry out tests on the substrates beforehand due to the different compositions they may have.

    ARDIGITAL

    Ardigital Printable Vinyl- Grey Removable Adhesive (PVG)

    Ardigital Printable Vinyl- Grey Removable Adhesive (PVG)

    $156.80
    $156.80
    Sale Sold out
    Shipping calculated at checkout.
    SIZE WIDTH X LENGTH

    41 In x 54 Yds

    FINISHED

    Gloss White

    Shipping costs and time

    Presentation of the product:

    Name: Ardigital Printable Vinyl- Grey Removable Adhesive (PVG)

    When it comes to high-quality printable vinyl, look no further than Ardigital's PVG. With its superior printing capabilities and durable material, this product is perfect for all your printing needs. Trust in Ardigital to provide the best printable vinyl on the market.

    Roll Quantity: 54 yds

    Online sale: 

    • Width: 41 inch, 48 inch, 55 inch and 60 inch.
    • Lenght: 54 yds (full roll).

    Warranty: 3 years

      Description: Ardigital PVG White vinyl with a good matte and glossy finish, very cohesive due to its PVG adhesive, its acrylic base is a structure composed of a highly flexible PVC film in an excellent matte or glossy finish.

      Ideal for advertising applications in elevators such as door and side areas, escalators, vehicle signage, household appliances, shop window displays, short-term displays and other graphic pieces.
      Vinyl features superior formability and high flexibility. The adhesive allows the vinyl to be slid and repositioned on the substrate until firm, uniform pressure is applied. The adhesive provides permanent adhesion on different substrates and allows efficient removal. The pigmentation of the adhesive gives the structure superior opacity.

      Characteristics
      - MATTE-GLOSS WHITE VINYL PRINT SIDE.
      - PERMANENT ADHESIVE V GRAY- PVG.
      - BACKING KRAFT PAPER - K135.
      - Service temperature range: 0°C to 90°C.
      - Application temperature range: 0°C to 40°C.
      - Die-cutability: N/Applicable.
      - Transparency: Regular.
      - Useful life (Months): outdoors vertical installation 36.

      Adhesive Behavior
      - Adhesion at Room Temperature (23 ± 2) º C.
      - Galvanized sheet - Metal: Good.
      - Polystyrene sheet: Good.
      - Acrylic sheet: Good.
      - Stainless steel: Excellent.
      - Glass: Good.
      - Cardboard: N/A.
      -MDF: N/A.

      Endurance
      - Aging: Excellent.
      - Ultraviolet: Excellent.
      - Water absorption: Regular.

      Limitations of use
      The product is not designed or recommended for the following uses and applications:
      • Walls or walls due to its easy-to-remove adhesive.
      • Curved or corrugated surfaces requiring superior conformity and low shrinkage.
      • Surfaces that do not have adequate cleaning, preparation and/or finishing.
      • Surfaces with low surface energy or with the presence of release agents (PTFE, silicones, waxes, etc.).
      • Paints that do not have adequate drying, anchoring and curing or irregular paints that have pores or ridges.
      • Rusty surfaces.
      • Non-rigid and flexible substrates that tend to lose their stability or original shape.
      • Pasted over existing graphics that require remaining intact during vinyl removal.
      • Contact with chemical compounds, fuels and/or exposure to environments with the presence of organic vapors, acid gases, etc.
      •Cardboard
      •MDF

      Printing Process
      It must be taken into consideration that the interaction of inks with self-adhesive vinyl during the printing process, so this affects its components, and this is why it is important to allow the respective curing process of the inks to act depending on the inks that are being used. The recommendations are to wait at least a period of 24 hours after printing to carry out an additional lamination or installation process. Likewise, the conditions at the time of printing should be around 25°C with a relative humidity between 40 and 60%.

      Pre-Installation Tests
      It is advisable before carrying out an installation, to carry out a test with a letter-size print, adhering it to the surface to be installed and checking the adhesion and removal behavior after 24 hours.

      Tips
      When installing, the following recommendations:
      • Ideally, they should be smooth surfaces.
      • Wear gloves to avoid fingerprints on the vinyl film.
      • As with most installation recommendations, it is important to clean the surface well of any degreasers or dust that may be present.
      • The most recommended thing in these cases is NOT to use aqueous solutions for installation and always do it dry.
      • It is recommended to clean with a cloth or alcohol wipe to remove grease and dirt.
      • Tools such as spatula and heat gun should be used to help the installation process correctly.
      • The help of a base primer to promote adhesiveness and reinforce the installation with edge sealant is recommended depending on the surface to help anchor the adhesive.
      • The installation conditions must be ideal and the surface to be installed must be between 4° and 40°C and relative humidity between 40 and 60%.
      • Hydrocarbon-free compounds must be used to clean the graph.

      Vinyl Removal
      Aspects to take into account for efficient vinyl removal:
      • Remove slowly and maintain an angle of approximately 90° between the surface and the vinyl.
      • Adhesive residue may remain on the surface, depending on the type of surface and compatibility with the adhesive, as well as the method used for removal.
      Before starting production, it is recommended to carry out tests on the substrates beforehand due to the different compositions they may have.

      View full details